Lake Clementine algae bloom history
California's Water Boards hold 9 bloom reports for Lake Clementine going back to 2016. Reports came in during 5 of the 9 years since then, with the busiest year being 2021 (4 reports).
State staff recommended an advisory 2 times: 2 Caution. Caution is the lowest level and means people and pets should stay away from scum and discoloured water.
That puts Lake Clementine in the top 20% of the 318 California lakes on this site for the number of years with blooms.
- 2016 1 report
- 2017 1 report
- 2018 None
- 2019 None
- 2020 None
- 2021 4 reports
- 2022 2 reports
- 2023 None
- 2024 1 report
When do algae blooms happen at Lake Clementine?
At Lake Clementine, reports are most often logged in March, May and August.
About 78% of reports fall between May and September, when warm, calm, sunny weather lets blue-green algae multiply.
Blooms can appear, move with the wind and fade within hours or days, so the time of year is only a guide.
Recent Lake Clementine algae reports
Recent reports came from 9 different locations around Lake Clementine, including Clementine Dam (below falls), Upper Lake Clementine Beach and Lower Lake Clementine. A bloom in one cove or beach doesn't mean the whole lake is affected, and conditions can differ a short distance away.
| Date | Location | Result |
|---|---|---|
| 7 May 2024 | Clementine Dam (below falls) | Bloom reported |
| 16 May 2022 | Upper Lake Clementine Beach | Algal mat alert sign |
| 17 March 2022 | Lower Lake Clementine | Caution |
| 31 August 2021 | Campground | Bloom reported |
| 31 August 2021 | Beach | Caution |
| 17 May 2021 | lower lake boat launch | Bloom reported |
| 17 May 2021 | upper day use area/beach | Bloom reported |
| 17 March 2017 | Lake Clementine, in North Fork American River | Bloom reported |
| 16 July 2016 | upper lake clementine beach and campsites | Bloom reported |
What the California results mean
California recommends one of three advisory levels when a bloom is checked, matched to the signs posted at the shore.
- Caution
- Toxins may be present. Stay away from scum and keep pets and livestock from drinking the water.
- Warning
- Toxins are at higher levels. No swimming, and keep children and pets away from the water.
- Danger
- High toxin levels. Stay out of the water and off the shore until further notice.
- Bloom reported
- A bloom was reported, often by a member of the public, without a formal advisory level.
Is Lake Clementine safe for dogs?
Dogs are at the greatest risk from toxic algae. They swallow water while swimming, eat scum on the shore and lick algae off their fur afterwards, and a small amount can kill a dog within hours. With blooms recorded in 5 different years here, take particular care at Lake Clementine in March, May and August.
- Keep your dog on a lead near water that looks green, scummy, foamy or discoloured, and away from algae washed up on the shore.
- If your dog gets in, rinse it straight away with clean water and don't let it lick its coat.
- Call a vet immediately if your dog vomits, drools, has diarrhoea, staggers, shakes or seems weak after being near the water.
Health effects of toxic algae
Blue-green algae (cyanobacteria) can produce toxins that affect the liver, nervous system and skin. Swallowing water during a bloom can cause stomach pain, vomiting and diarrhoea. Skin contact can cause rashes, and breathing spray from the water can irritate the eyes, nose and throat. Children are at higher risk because they are smaller and more likely to swallow water.
How to spot a bloom
Toxic blooms can look like pea soup, spilled paint or green streaks on the surface, and they can also be blue, brown, white or red. Scum often collects along the shore downwind. If you can't see your feet in knee-deep water, or you aren't sure, stay out.
Don't drink untreated lake water, and don't boil it to make it safe: boiling doesn't destroy algal toxins. If you feel unwell after contact with the water, contact a doctor or Poison Control on 1-800-222-1222.
Nearby lakes with algae reports
- Combie Lake9 km away, 2 reports, last in 2026
- North Fork American River10 km away, 6 reports, last in 2024
- Bear River15 km away, 3 reports, last in 2025
- American River17 km away, 26 reports, last in 2025
- Folsom Lake26 km away, 18 reports, last in 2026
Questions about Lake Clementine
Is there algae in Lake Clementine right now?
There are no bloom reports for Lake Clementine in the last 30 days of California's data. The most recent was a bloom report on 7 May 2024 at Clementine Dam (below falls). California's data is checked every day, so for today's conditions check the California HABs Portal map and the signs at the shore.
When was the last algae bloom at Lake Clementine?
The most recent entry in California's data is from 7 May 2024 at Clementine Dam (below falls): a bloom report.
Has Lake Clementine had toxic algae before?
Yes. Blooms are recorded in 5 of the 9 years from 2016 to 2024, most often in March, May and August.
Can dogs swim in Lake Clementine?
Keep dogs out of the water whenever a bloom is reported or the water looks green, scummy or discoloured. Dogs are the animals most often killed by algal toxins because they swallow water and lick their fur. If your dog swims in water that might have algae, rinse it with clean water and call a vet if it vomits, drools, staggers or seems weak.
Can you eat fish caught in Lake Clementine during a bloom?
If you keep fish caught during a bloom, health agencies advise removing the guts and liver and rinsing the fillets in clean water before cooking, because toxins collect most in the organs. Some agencies advise not eating fish from an active bloom at all, so follow local guidance.
About this data
This page uses official records from the California State Water Resources Control Board, which updated daily. Reports are grouped by waterbody. The site was last rebuilt on 24 October 2026.
States only test some lakes, some of the time, so a lake without a recent report hasn't necessarily been checked. This page is independent, isn't affiliated with the State of California, and isn't health advice. View the source data.